Opel+ Fiat IMMO Tool Immobilizer V3.50

Description:

Software language: English.
Pin code reading from engine ecu of some Opel cars with Immo2.Program/erase keys of immo1,2 and 3.Pin code is required! Clear engineecu,adaptation of virgin ecu to Immo2. Clear immo2, immo3, adaptationof virgin Immo2 to engine ecu.

List of supported cars:

PIN code read from Opel cars with Delco Multec engine ecu
HSFI 2.0-2.5 - Model - Year - Engine
Vectra B 2000-2001 Y16XE,Z16XE
Astra G 2001-2005 Z14XE,Z16XE,Z16SE
Corsa C 2001-2004 Z14XE
Meriva 2003-2004 Z16SE
Astra,Corsa with Delco 1.7 DTI diesel 1999-2004

Delco "F" Old Multec Model Year Engine
Astra,Vectra B 1998-2000 X16SZR

How to read pin code from engine ECU
This procedure works with Opel Immo2 cars ONLY!

Switch ignition ON, Start software, and select engine ecu type from menu.
Press "Connect Selected ECU" button, after 5 seconds the data of the ECU will be shown on screen.
Press "Read PIN", software will read data from the engine ecu and afterfew seconds two pin codes will be displayed on screen. One for petrolengine and one for diesel engine. Choose the correct pin code dependingon engine type - diesel or petrol. If you have selected wrong ecu,"message lost error"will be issued, and the connection with ecu will beterminated. You can select other ecu, and can try again.
Warning: Selecting"Delco All Types" will read pin code but also will set trouble code0602 in engine ecu, which can't be erased!!! Use this option only if youdon't care about this trouble code!

Connect immo2, and press"Special functions". New window will be open.Select desired operation and after that enter the correct pin code. Thecommands "Clear engine ecu" and "Clear immobiliser2" requires additionalwait time, from 10 minutes to several hours in the worst case. The carhave to be left with ignition switched ON during this wait time! Duringthis wait time, you can turn off your laptop.